WTS: CCR'S Winter Refinishing Sale

Discussion in 'Sold/Expired Classifieds' started by ccr, Jan 23, 2009.

  1. ccr

    ccr Member

    68
    Sep 9, 2004
    It is time once again for our annual Winter sale

    CERA-HIDE is the result of two years of research and development with breakthroughs is the field of Nano Technology.

    CERA-HIDE is made by us and is formulated just for firearms. Believe me when I say I have tried all of the ready made gun finishes like Cerakote and Duracoat that claim to be the best and have not found one of them to live up to my standards or their claims of durability

    CERA-HIDE
    is a highly developed thermally cured coating that has a Ceramic infused Nano matrix.

    CERA-HIDE offers greatly improved abrasion and wear resistance. It offers untold rust and corrosion resistance, and is self lubricating. CERA-HIDE makes cleaning your gun a breeze.

    CERA-HIDE is available in House Black, Our Stainless Steel look, BTM which is similar to the color of nickel and OD Green.CERA-HIDE can be applied to all steels and alloy

    Complete Handguns------------ Price $169.00 Sale Price-----$149.00
    Slides----------------------- Price $79.00 Sale Price------ $59.00

    Ketec P3at &P32 slides Sale Price.....$29.00
    Keltec PF9 slides Sale Price.... $35.00

    Meprolight night sights $98.00 installed most models.

    [​IMG]

    We Are FFL's As Required By Law So You Can Ship Directly To Us Yourselves


    Also on Sale our Cera-Plate
    Cera-Plate is a true composite plating process consisting of an Electroless Nickel /Boron Nitride matrix


    Cera-Plate is so good I see it being offered by imitators.

    Cera-Plate Benefits are

    • Extremely low coefficient of friction much lower then that of standard nickel or Nickel/Teflon finishes like NP3
    • Excellent lubrication which reduces the wear much more then other plating will
    • The lubrication will out last PTFE(Teflon)
    • A hardness level much greater then standard nickel or Nickel /Teflon coatings
    • Excellent corrosion and rust protection
    • Fantastic Satin look and smooth to the touch not slippery like the Nickel /Teflon finishes such as NP3

    Cera-Plate will be available on Carbon Steel only. We will not be plating and anodized alloy. We believe that Sig uses the best type III hard anodize and we will not remove it. We will however refinish your alloy frame using our Cera-Hide coating in BTM which is a good match for the Cera-Plate in color.
    Fall Savings Prices

    [​IMG]

    Slide----------- -----$85.00 Sale Price----$75.00
    Barrel Only----------$20.00 Sale Price----$16.00
    Set of Controls------ $49.00 Sale Price---$39.00
    Slide & Barrel combo $98.00 Sale Price---$89.00

    Keltec P3AT & P32 slides with barrels Sale Price.... $49.00
    Keltec Pf9 slides and barrels Sale Priced...$49.00
     
  2. zeke

    zeke New Member

    Dec 20, 2005
    What would the price for a P11/40 slide be?
     

  3. TxCajun

    TxCajun Administrator Staff Member Supporter

    Sep 7, 2004
    Texas
    Same question here. :)
     
  4. virtual-rj

    virtual-rj New Member

    Jul 22, 2007
    Houston, TX
  5. bw77

    bw77 New Member

    145
    Dec 1, 2004
  6. aggiec05

    aggiec05 New Member

    70
    Jul 5, 2007
  7. ccr

    ccr Member

    68
    Sep 9, 2004
    P11 slides will be $49 in Cera-Hide

    P11 slide will be $69 in Cera-Plate
     
  8. adamsesq

    adamsesq New Member

    Dec 25, 2006
    Brad - I know this guy...who has a HC slide that is pitted and surface rusted in places. Would that all need to be cleaned off before sending to you or would your prep work take care of that?

    -Scott
     
  9. billjohnso20

    billjohnso20 Active Member

    Dec 7, 2008
    I sent a PM 1/23/09. Still no reply. I am considering this for two of my guns. But still I wait.
     
  10. ccr

    ccr Member

    68
    Sep 9, 2004
    billjohnso20
    PM answered
     
  11. bw77

    bw77 New Member

    145
    Dec 1, 2004
    Did you get my email on refinishing my 1911?
     
  12. ccr

    ccr Member

    68
    Sep 9, 2004
    Didn't get the email but I received your PM and sent you a reply
     
  13. aubie515

    aubie515 Guest

    Are you able to finish scandium?  I have a 1911PD model that I would like to have the slide refinished.
     
  14. ccr

    ccr Member

    68
    Sep 9, 2004
    Yes we can refinish Scandiam
     
  15. princemorr2003

    princemorr2003 New Member

    Mar 3, 2005
    Just to let you guy's know Brad's work is awesome and i give him 2 thumbs up


    Dan
     
  16. adamsesq

    adamsesq New Member

    Dec 25, 2006
    Bump.

    -Scott
     
  17. ccr

    ccr Member

    68
    Sep 9, 2004
    It will depend on how bad the rust and pits are.
     
  18. adamsesq

    adamsesq New Member

    Dec 25, 2006
    Bumping the question in case it got missed.

    -Scott
     
  19. zeke

    zeke New Member

    Dec 20, 2005
    t

    The second page of the thread wasn't displaying, so even thought scotts question was answered you couldn't see it.

    The thread should be good to go now.
     
  20. ccr

    ccr Member

    68
    Sep 9, 2004
    Thanks. I see that all my PM's are gone so if I didn't get back to someone please resend it