[Picatinny_Pete]

Hi,

Welcome to the KTOG P3AT BB. I suggest that you field strip you P3AT and make sure that the ejector (not extractor) is still in the frame if it isn't you'll see the cut in the frame were it was. It's fairly common the lose this part cleaning if the pistol is field-stripped. Kel-Tec will send you a new one if its lost at no charge.

Best Regards:

 

[Picatinny_Pete]

Hi,

Happy top be of service. The next time you clean your P3AT a drop of blue lock-tite, or Indian Head gasket shellac on the ejector cut will help retain the ejector. Here's to good shooting.

Best Regards: