Community for Kel-Tec Shooters banner
1 - 9 of 9 Posts

· Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hi guys! I'm new here! Just bought my dream gun!

It came with a 17 round PMAG... which would be great, but it won't drop free when empty. I hit the mag release (yes, the mag is all the way in with the audible click) and nothing happens. I have to hold the mag release and manually pull the magazine out. When I load the magazine, the magazine drops fine.

Is this part of normal break-in period? I have yet to fire the gun.
 

· Registered
Joined
·
4,828 Posts
Hi guys! I'm new here! Just bought my dream gun!

It came with a 17 round PMAG... which would be great, but it won't drop free when empty. I hit the mag release (yes, the mag is all the way in with the audible click) and nothing happens. I have to hold the mag release and manually pull the magazine out. When I load the magazine, the magazine drops fine.

Is this part of normal break-in period? I have yet to fire the gun.
Often a normal break-in minor glitch. If it doesn't resolve itself, just put some very fine grit self-stick abrasive paper on the side of the magazine that the mag release button is on (the internal catch will be on the other side and you don't want to sand on it). Run the mag in and out until it frees up.
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top