reduced- WTS/WTT PLR-16/SU-22/PLR-22 proto forend

Discussion in 'Sold/Expired Classifieds' started by jessej396, Mar 3, 2009.

  1. jessej396

    jessej396 New Member

    219
    Jan 2, 2008
    The creation of this part is detailed in the PLR-16 forum.  Newer versions have 3 more rail notches in length to the rear, as well as mounting holes for extensions on the end and top.  This is coated with Robar's matte black Rogaurd(TM), which cost me $40 by itself.  The coating has a couple very minor nicks at the end of the rails where the steel locking spring of the rail covers I put on it has to scrape past (as seen in closeup, 3rd pic).  There is a ding visible on the left side of the round section of the part in the second picture, which was there before the coating, so it is black, despite it's lightened reflection in the photo.  This is a precision 5 axis CNC milled part.  There are some ridges in the underside of the rails from minor overcuts in the early machining ops, but these do not affect the useability of the rail.  Also, for whatever it's worth, this is the first commercial part produced by my as yet unannounced and unformed gun accessory company, so when it's a big deal 5 years from now you can say "I got the first thing they ever made!"

    $80 or trade.  I like green lasers, ridiculously powerful flashlights and uh,.. GUNS.  Yeah.  Open to trades for this plus additional similar parts as well for more valuable collateral..  

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  2. jessej396

    jessej396 New Member

    219
    Jan 2, 2008
    Re: WTS/WTT PLR-16/SU-22/PLR-22 prototype forend

    Oh, and I can't seem to find any black 10-32 nuts, but I'd be happy to send one when I track them down for all the other parts.
     

  3. jessej396

    jessej396 New Member

    219
    Jan 2, 2008
    Re: WTS/WTT PLR-16/SU-22/PLR-22 prototype forend

    Any takers at $60.00?
     
  4. jenshubby

    jenshubby New Member

    569
    Mar 5, 2008
    Re: reduced- WTS/WTT PLR-16/SU-22/PLR-22 proto for

    Would this fit a Sub2k?
     
  5. jessej396

    jessej396 New Member

    219
    Jan 2, 2008
    Re: reduced- WTS/WTT PLR-16/SU-22/PLR-22 proto for

    Hadn't checked (don't have one), but I seriously doubt it.
     
  6. jessej396

    jessej396 New Member

    219
    Jan 2, 2008
    Re: reduced- WTS/WTT PLR-16/SU-22/PLR-22 proto for

    Did I mention that it is free floating, acts as a heat sink for the chamber and is VERY rigid? I'd keep it on mine, but I just keep making better ones... :D
     
  7. Liberty4Ever

    Liberty4Ever Moderator Supporter

    May 19, 2006
    Lexington KY
    Re: reduced- WTS/WTT PLR-16/SU-22/PLR-22 proto for

    At only $15 more than the Kel-Tec forend, I can't believe this wasn't gone as soon as it was offered.
     
  8. aubie515

    aubie515 Guest

    Re: reduced- WTS/WTT PLR-16/SU-22/PLR-22 proto for

    Sent you a PM.
     
  9. zeke

    zeke New Member

    Dec 20, 2005
    Re: reduced- WTS/WTT PLR-16/SU-22/PLR-22 proto for

    I'll take it

    PM on the way