Community for Kel-Tec Shooters banner

161 - 180 of 198 Posts

·
Registered
Joined
·
34 Posts
Im still missing a few pieces, but its coming along nicely anyway. Next up is a cheek riser and a nice scope wrap, maybe even a flash hider.

Thanks to steve nevil for the inspiration! <3

View attachment 46866 View attachment 46858
Ok, I have to know where you got your Picatinny rails from. I just ordered an OD Raptor rail, and have no clue what parts to get to match. Yours looks GLORIOUS!
 

·
Registered
Joined
·
2 Posts
Here it is! My brand new OD RDB20. I found a good price on the Burris RT6 1-6x24mm with attached Fastfire III so that will be here by the end of the week. I'm excited for a chance to get it out to the range. Already upgraded to the Lucky Irishman Rhino Rail along with their right handed bolt release.
 

Attachments

·
Registered
Joined
·
327 Posts
Wolf's RDB-C.jpeg
Got the survival foregrip for my RDB-C from KT (price is $100 these days), much prefer this look (especially with the scout-style forward red dot) instead of the big lumbering one jutting forward like Jay Leno's chin it comes with stock.
  • Survival foregrip
  • Pinty red/green reflex sight
  • A length of ladder-style rail cover
  • Charging handle on the right side due to the way I shoot/reload bullpups
  • Dan Haga Designs cheek riser + enhanced buttstock
Realized there's no photos of a short-foregrip-long-barrel that I could find, so figured time to share my RDB finally.
 

·
Registered
Joined
·
24 Posts
My pretty much stock RDB 17. I did add the LI Rhino rail which I love. A Stark forward grip, highly recommended, and a VG6 Epsilon brake (should have gone with the Gamma) with a CAGE device. Sporting an Aimpoint ML3, soon to be a Vortex Spitfire 3X Prism Sight. Going with a Dan Haga magwell instead of the crappy factory one, and probably his Butt Stock upgrade as well.
So far, I've only fired about 200 rounds of M855 ammo, but it's run flawlessly out of the box. I almost didn't buy an RDB because of all the bad reviews awhile ago. But I'm very happy with mine. Although the Aimpoint does need a little riser for a good cheek weld.
 

Attachments

·
Registered
Joined
·
37 Posts
Just a bit of kit:
a cheapo Feyachi RS-30 Reflex Sight
FAB Defense "Ergonomic Pointing Grip"
the Dan Haga top cover

a suppressor, and a sight that's worth a damn are next on the list!


I would look at the Dan Haga mag well and the Lucky Irishman bolt release first. These upgrades defiantly make the rifle better.
 

·
Registered
Joined
·
2 Posts
I would like to reintroduce my kitted out RDB20. From top to bottom:
  • A backwards P.E.P.R mount with Burris RT-6 and a (too high above the bore) Fastfire 3. I put the P.E.P.R. mount on backwards because as a right-hander I bust my knuckles with the fat knobs over the left-mounted charging handle.
  • From there it's a Dan Haga designs buttstock replacement and the Magpul cheek riser.
  • Below that we have the LIFE Industries right-handed bolt-release and with the OG Rhino Rail.
I want to get the Dan Haga Designs magwell but I should probably get the thing to a range before I add any more (darn quarantine). I like the two-tone, is that weird? who cares.

Praxis.jpg
 

·
Registered
Joined
·
24 Posts
I would like to reintroduce my kitted out RDB20. From top to bottom:
  • A backwards P.E.P.R mount with Burris RT-6 and a (too high above the bore) Fastfire 3. I put the P.E.P.R. mount on backwards because as a right-hander I bust my knuckles with the fat knobs over the left-mounted charging handle.
  • From there it's a Dan Haga designs buttstock replacement and the Magpul cheek riser.
  • Below that we have the LIFE Industries right-handed bolt-release and with the OG Rhino Rail.
I want to get the Dan Haga Designs magwell but I should probably get the thing to a range before I add any more (darn quarantine). I like the two-tone, is that weird? who cares.

View attachment 49708
The Two Tone looks good I've got the LI bolt release but it doesn't work with the way mine is designed. Apparently Keltec made a couple of different designs. I may try to modify it. The Dan Haga Buttstock and Magwell are definitely going on it. I'm waiting on my Vortex 3X Prism sight to replace the Aimpoint. Mine is still a work in progress.
 

·
Registered
Joined
·
37 Posts
I would like to reintroduce my kitted out RDB20. From top to bottom:
  • A backwards P.E.P.R mount with Burris RT-6 and a (too high above the bore) Fastfire 3. I put the P.E.P.R. mount on backwards because as a right-hander I bust my knuckles with the fat knobs over the left-mounted charging handle.
  • From there it's a Dan Haga designs buttstock replacement and the Magpul cheek riser.
  • Below that we have the LIFE Industries right-handed bolt-release and with the OG Rhino Rail.
I want to get the Dan Haga Designs magwell but I should probably get the thing to a range before I add any more (darn quarantine). I like the two-tone, is that weird? who cares.

View attachment 49708
I like the enhanced buttpad. That is my next purchase.
 

·
Registered
Joined
·
73 Posts
Why is YouTube suggesting Slug Porn after watching your video?
Pretty sure that's related to whatever YOU watched on YouTube recently. I get "3D printing - 13 things I wish I knew when I got started" and "how to apply silicone or caulk like a pro". So be honest buddy, what kind of kinky stuff you been searching lately? Lol
 
161 - 180 of 198 Posts
Top