Community for Kel-Tec Shooters banner
1 - 5 of 5 Posts

·
Registered
Joined
·
165 Posts
Chambering and shooting are two different things. Take it out and shoot it, if they don't feed, try something different. MY P-11 has always been 100% with Hornady Critical Defense.
 

·
Registered
Joined
·
179 Posts
If you haven't polished your feed ramp, do so. I make sure it shines like a mirror and have never had any ammo not feed. But-- I've never tried the Hydro shock in my P11. I used it in a Markov .380 I had and it fed just fine.
 

·
Registered
Joined
·
165 Posts
If you haven't polished your feed ramp, do so. I make sure it shines like a mirror and have never had any ammo not feed. But-- I've never tried the Hydro shock in my P11. I used it in a Markov .380 I had and it fed just fine.
Can't stress this enough for any auto pistol. Get that ramp polished for sure. I use Simichrome paste! P.S. lightly polish, don't put a wear and tear spot on your ramp by using too much force.

https://www.amazon.com/Simichrome-390050-Metal-Polish-Tube/dp/B0002YUQ4E
 

·
Registered
Joined
·
478 Posts
May not be a match for you pistol. Polishing might make
them "work", but the way a P-11 feeds, I'd say it's as likely
as not, to make no noticeable improvement, unless you
have some weird stuff going on with your piece.

See if you can swap em with somebody for a few Speer
Gold Dots.

If those don't feed either, old Federal 9BP (not 9BPLE)
is pretty much guaranteed a reliable feeder.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top