[Spokane2303]

Any way to improve the visibility of the P32's front sight?

I tried a bright green fingernail paint; but, it just stripped off.

My old eyes are having trouble seeing the little black nub.

 

[CJP32]

I think some guys paint a white stripe down the top of the slide. They might have mentioned using appliance touch up paint or white nail polish. I would make sure to clean the slide really well first.

 

[Toakey45036]

I used white nail polish. Wiped the sights down with solvent first, then carefully brushed on the paint. I did this with poor eyesight and shaky hands, but it turned out OK.

There is a Youtube video for the original Ruger LCP where the guy used tape to prevent the paint from getting all over. I tried to use tape the first time but I couldn't get it to conform to the sight well enough. While my paint job was OK I'd also be interested if anyone has any other duggestions.

 

[TxCajun]

Testor's model paint works well. It is commonly available.

 

[Dukes4Aces]

2nd for testors. White on front blade and cut a toothpick for rear to create a 2 dot. In my opinion I believe the weapon is designed for Point shooting anyway that said it's pretty accurate for a little pocket pistol when using sites

 

[lewis142]

I used some white touch up paint. Degreased masked off the front sight, two rear dots on the top of the rear. Let it dry good. Took the tape off and used touch up clear over the top. We'll se how it wears.