Joined
·
10,751 Posts
I'm using a 4X32 Tru-Glo. I like it on the little SU-22 because it's a short scope that's small and fairly light weight. The optics are a bit distorted along the outside but clear in the center, and I'm still trying to determine if the parallax will be a big problem at longer distances. It seemed pretty good at 25 yards but less accurate at 50 yards, but that was probably a difference in me shooting prone versus sitting on the gate of my pickup truck.TriggerlockSLC said:What type of scope are you guys using?
I had a 3-9X50 Simmons scope on the SU-22 and it worked very well, but seemed too big and heavy for the small and lightweight rifle. I'm strongly motivated to keep it small and lightweight.
A 4X fixed power scope seemed just about right for my needs and the effective range of a .22 LR.
Welcome to the Presbyopia Shooters Club!TriggerlockSLC said:My eyes are getting to the point where everything over about 30 yards would just be a crap shoot.
It has a standard Picatinny rail, so your mounting options are good. Just buy Picatinny or Weaver rings with the diameter that matches your scope (typically 1" or 30mm). The only other issue is the height of the rings. The centerline of the scope should be mounted at the height of your eye when you have a comfortable and repeatable cheek weld on the stock, but the rings also need to be high enough to ensure adequate clearance for the objective lens on the front of the scope.TriggerlockSLC said:Any trick to getting it to attach to the SU?
If you'd like to be able to take off the scope and use iron sights in the field, consider quick release rings. Leupold makes some nice QR rings for about $50, which may be a bit steep for this application. The other option is to carry a small tool with the rifle that can be used to remove your rings and scope.
When mounting the scope, make sure you have the correct eye relief (distance from the eyepiece to your eye). It's not a safety issue with a low power .22 rifle, but your pupil needs to be near the focal point of the scope to see a clear image. Most of the fore and aft adjustment will be determined by trial and error, but you should try to determine the best height for the rings before buying them.