Community for Kel-Tec Shooters banner

1 - 20 of 25 Posts

·
Premium Member
Joined
·
15,000 Posts
Discussion Starter · #1 ·
Ha! Just checked my mail and I got a little box from Jack!

I had him nickel plate my P3AT.

He also did my PF-9 about a year ago. The P32 is hard chrome.



3AT on the right...along with my PF9 done by Jack and my hard chrome P32.



 

·
Registered
Joined
·
467 Posts
Looks very nice! I really want to send Jack the slide to my Bersa 9mm to be plated. I'm afraid it will end up being a little more expensive since it's more complicated than the Kel-Tecs though. Jack lives just a couple of hours south of me; I wish he was close enough for me to just drive down and drop it off... ;D
 

·
Premium Member
Joined
·
15,000 Posts
Discussion Starter · #4 ·
I carry the PF9 the most (virtually every day) and it shows NO wear in a year and a half.
As you can see, I use a belt clip tho...no holster.

Another great plus, the nickel plating acts as a lubricant.
I only use a few drops of light weight oil, no grease on any of them.
 

·
Registered
Joined
·
623 Posts
haugrdr said:
I carry the PF9 the most (virtually every day) and it shows NO wear in a year and a half.
As you can see, I use a belt clip tho...no holster.

Another great plus, the nickel plating acts as a lubricant.
I only use a few drops of light weight oil, no grease on any of them.
Great to hear. Sounds like a good treatment to a slide. Looks nice too.
 

·
Premium Member
Joined
·
15,000 Posts
Discussion Starter · #6 ·
diamond said:
[quote author=haugrdr link=1264194724/0#3 date=1264293567]I carry the PF9 the most (virtually every day) and it shows NO wear in a year and a half.
As you can see, I use a belt clip tho...no holster.

Another great plus, the nickel plating acts as a lubricant.
I only use a few drops of light weight oil, no grease on any of them.
Great to hear. Sounds like a good treatment to a slide. Looks nice too.[/quote]


Thank you, I agree    :)

and for 30 bucks.
 

·
Registered
Joined
·
623 Posts
haugrdr said:
[quote author=diamond link=1264194724/0#4 date=1264297882][quote author=haugrdr link=1264194724/0#3 date=1264293567]I carry the PF9 the most (virtually every day) and it shows NO wear in a year and a half.
As you can see, I use a belt clip tho...no holster.

Another great plus, the nickel plating acts as a lubricant.
I only use a few drops of light weight oil, no grease on any of them.
Great to hear. Sounds like a good treatment to a slide. Looks nice too.[/quote]


Thank you, I agree    :)

and for 30 bucks.[/quote]
Sheesh, you can't beat that.
 

·
Banned
Joined
·
31 Posts
Just got back my nickel-plated P3AT slide from Jack. He did a great job, plan to see if he will deep blue my 1911 slides. Said it would take 3 weeks, 3 weeks it was. No doubt that the slide is MUCH slicker.
 

·
Registered
Joined
·
1,679 Posts
Looks real sharp! I duracoated mine and like it but the nickel plating looks good too. Let us know how it holds up.
 

·
Banned
Joined
·
2,968 Posts
for those who do not know the secret hand-shake, please provide further detail (beyond first name)

full name ?
contact info ?
web site ?

Bert
 

·
Premium Member
Joined
·
15,000 Posts
Discussion Starter · #11 ·
For Jack? Ooops...sorry, I should have posted the info.

Jack Fuselier
KTOG Nickel Plating Offer---http://www.gunsmith.fuselier.com/slideoffer.html

His gunsmithing website---http://www.gunsmith.fuselier.com/

That what ya need?
 

·
Banned
Joined
·
2,968 Posts
;)

haugrdr said:
For Jack?   Ooops...sorry, I should have posted the info.

Jack Fuselier
KTOG Nickel Plating Offer---http://www.gunsmith.fuselier.com/slideoffer.html

His gunsmithing website---http://www.gunsmith.fuselier.com/

That what ya need?
 

·
Registered
Joined
·
4 Posts
That is beautiful. You convinced me. I just put mine in the mail today.
J
 

·
Registered
Joined
·
437 Posts
Jack has done several guns for me...great quality work and INEXPENSIVE. He also has done his full "Fluff and Buff" on all the guns I have sent him...including mags.

I had a few problems with my Kel-Tec 380...and after his "Fluff & Buff" I have NEVER had a problem! :)
 

·
Registered
Joined
·
42 Posts
Looks really nice! I'll be sending all 4 of my K-T's. Wonder If the Glock's will take well to this treatment?
 

·
Registered
Joined
·
437 Posts
DOZER: Don't know about a Glock. I sent him my HK (Heckler Koch) Mark 23 SOCOM for a full "Fluff & Buff," slide and mag job. I trusted him with this gun which cost over $2,300! To get back to the SOCOM slide finish, I had the slide Dura-Coated back to Afgan. Tan.

Boggs
 

·
Registered
Joined
·
19 Posts
Had my P3AT done about 1 1/2 yrs ago and no wear even tho I carry every day. Had my P11 done a month ago  and another beautiful job. Something that no one has mentioned and is a plus in my opinion,  it tightened up the slide and increased accuracy on both of them.
 
1 - 20 of 25 Posts
Top