Newbie,.how far to disassemble to durakote slide?

Discussion in 'P-3AT' started by thedave8, Sep 14, 2009.

  1. thedave8

    thedave8 New Member

    27
    Sep 14, 2009
    Hi guys
    I am new here, I decided to give a Kel Tec a second chance. Years ago i had a p32 i bought used.....it was a jamomatic and i sold it. I wasn't aware i could have done all these simple things to it to get it to work right. Scince I found this site, i took the plunge and bought a new P3AT in olive green/park finish. I am about to lube it and head to the range and see if this one will work right out of the box.....we shall see. Anyway, i decided to do the slide in flat black durakote over the factory parkerizing, but was curious just how far i really need to disassemble the slide to do so. Only has to bake at 350 i believe.....sorry so long a post...thanks in advance for any input.
     
  2. JFB

    JFB New Member

    Jul 25, 2005

  3. thedave8

    thedave8 New Member

    27
    Sep 14, 2009
    Re: Newbie,.how far to disassemble to durakote sli

    thanks......i returned from the range with only one failure to extract out of 50 rds.....i am relieved it did soo well....380 on a small package like this is definately hard on the hands.......
     
  4. dirksterg30

    dirksterg30 New Member

    57
    Apr 24, 2008
    Re: Newbie,.how far to disassemble to durakote sli

    dave,

    glad the P3AT is working for you.

    Be sure to post pics when you have it duracoated.
     
  5. Rubb

    Rubb New Member

    Jun 19, 2006
    Re: Newbie,.how far to disassemble to durakote sli

    Welcome Dave

    Reliability of your new P3AT is not at all a surprise to me but....
    having a post count of one when I can clearly see two is  :eek:
     
  6. thedave8

    thedave8 New Member

    27
    Sep 14, 2009
    Re: Newbie,.how far to disassemble to durakote sli

    thanks for the welcome and responces......as far as posts..1....2....? Somehow my first post doubled.....i deleted 1 of em....if that was what you were refering to....
     
  7. thedave8

    thedave8 New Member

    27
    Sep 14, 2009
    Re: Newbie,.how far to disassemble to durakote sli


    thanks...will do on the pics