[Capt_Augustus]

I'm new to this pistol and have been to the range a couple of times. I seem to have a problem with the last round in the magazine not ejecting. I don't know enough to know if FTE is failure to extract or eject. I have looked at several FTE's on this site, but I was hoping someone out there has a clue for me to try.

I know you have to have so many entries on this board, but everything mentioned for the pistol is where you can't go. I guess I'm hesitant to show how much I don't know, just to fill a quota.

I do enjoy the board and I have learned a lot about this neat small pistol.

 

[JFB]

Be sure the ejector is still in the frame rail. the preceding rounds in the magazine help force the spent round out, so the ejector missing might not be noticed. the ejector knocks the spent round free of the slide at the last 1/8" slide travel

 

[TxCajun]

Yes, part 115 has escaped and headed back to Cocoa Beach. Call Kel-tec and they'll return him to you.
http://www.kel-tec-cnc.com/p3atparts.htm

Pay attention when you field strip the gun or he will take off again.

For the P-3AT simply turning the grip and frame upside down after removing the slide will likely make the ejector (part 115) fall out.

http://www.1bad69.com/keltec/disassembly.htm