Community for Kel-Tec Shooters banner
1 - 4 of 4 Posts

·
Registered
Joined
·
242 Posts
Discussion Starter · #1 ·
He, so for you guys who have owned a PMR for a while is there anything I should buy a few of to keep my PMR running.

Take down pin seems obvious.

Should I order a few firing pins, extractor claws? spring?

What is likely to break that I may need to repair on the fly?
 

·
Registered
Joined
·
705 Posts
Add buffers to your list. I always have spare firing pin. Have never had issue with anything. The buffers are better that my original.
 

·
Registered
Joined
·
121 Posts
I broke a firing pin Thursday at the range. Replacement on the line and was glad I had my tools and spare parts box.

I have 2 take down pins, 2 firing pins, extractor springs/firing pin springs and 2 buffers.

For the firing pin replacement you'll need the appropriate size punch (1/16 IIRC) and a small hammer. It's a delicate job with some small parts so i suggest practicing this at home.
 

·
Registered
Joined
·
242 Posts
Discussion Starter · #4 ·
I really wish TC would bump up the size of there pins and springs 1 notch.

They really are so tiny that they of course work. But the pins in the SU-16 or so tiny and the TD pin on the PMR is so tiny these parts I worry create an achilles heal.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top