Community for Kel-Tec Shooters banner
1 - 2 of 2 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Has anyone explored the possibility of the MI red dot mount working on a Gen 1 with the Aluminum rail? It seems reasonable to me with some modification, maybe. My two main areas of concern would be the aluminum rail slot to bore axis giving the right amount of clearance when the gun is folded. And 2. the width of the aluminum rail compared to the Gen2 handguard to get the red dot mounted over the center. One other minor concern is the rails slot width compared to M-Lok. But I will be hacking up the rail anyway, so if I have to make the slot wider that is no big deal. I SBRed the gun will be putting a can on it. Yes....I have the stamps. Thanks for any input, I searched but didn't find anything. If I missed it, please point me in the right direction. Much appreciated!
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top