Community for Kel-Tec Shooters banner
1 - 1 of 1 Posts

·
Registered
Joined
·
5,567 Posts
The hammer block can be a pretty easy DIY fix and KT will send you one for free. If you look at the top of the PF9 section there is a good thread that will show you how. The P3 is basically the same just smaller. The only tools you should need will be a set of punches, a small hammer, scrap of wood and maybe a small screwdriver or needle nose pliers. If you have any trouble I'm sure we could talk you through it.

I don't think KT would send back a 2G for something as simple as a hammer block but I didn't send my G1 P32 in to find out.

CJ
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top