Community for Kel-Tec Shooters banner
1 - 17 of 17 Posts

·
Registered
Joined
·
30 Posts
Discussion Starter · #1 ·
I bought 3 Bersa finger extensions for my 3AT magazines and what a difference they make in follow-up shots. I don't have big hands, but cannot get my ring finger completly on the grip and noticed that during rapid fire, I had some muzzle flip. With the magazine extensions in place, this problem went away completly and my aiming is much better. What a difference and they only add a quarter inch to the grip length.
Take a look at them:
http://www.1bad69.com/keltec/p3at-fingerrest.htm
 

·
Registered
Joined
·
8,989 Posts
Neatest thing since sliced bread ain't they.

Jim, who has them on all his flush mount mags and is grateful to Wilson for pushing these things
 

·
Registered
Joined
·
56 Posts
I just ordered 2 more for the new 3 AT I picked up last week end.  The new gun has a green grip, hope the black finger extension looks OK with the green grip.  Even if it looks a little funky, having the extensions on the magazines is a definate "Must Have" (IMO).
 

·
Registered
Joined
·
3,755 Posts
SnapCap said:
The new gun has a green grip, hope the black finger extension looks OK with the green grip.
Unlike Gray Ghost, I suspect your P-3AT has black frame pins, trigger, magazine base plate and aluminum frame, so the black extensions will have company.

Wilson – who’s wife doesn’t like three toned guns

PS I normally keep the extra magazines loaded so the wife doesn’t see the black followers :D
 

·
Registered
Joined
·
56 Posts
Wilson said:
Unlike Gray Ghost, I suspect your P-3AT has black frame pins, trigger, magazine base plate and aluminum frame, so the black extensions will have company.

Wilson – who’s wife doesn’t like three toned guns

PS I normally keep the extra magazines loaded so the wife doesn’t see the black followers :D
Wilson,
I like the special treatment you put on the "Gray Ghost". What did you use on the magizines and trigger - spay paint?
 

·
Registered
Joined
·
611 Posts
Wilson said:
Unlike Gray Ghost, I suspect your P-3AT has black frame pins, trigger, magazine base plate and aluminum frame, so the black extensions will have company.

Wilson – who’s wife doesn’t like three toned guns

PS I normally keep the extra magazines loaded so the wife doesn’t see the black followers :D
aesthetically pleasing absolutely!
heavy metal, the black and the silver
but total black is my fetish
 

·
Registered
Joined
·
3,755 Posts
SnapCap said:
I like the special treatment you put on the "Gray Ghost". What did you use on the magizines and trigger - spay paint?
The slide is Kel-Tec hard chrome. The polymer trigger was refinished in a custom mixed silver DuraCoat to match the slide. The magazine bodies were refinished in a Brushed Stainless color of Gun Kote (supposed to be better on metal). The magazines are just a shade off from the slide and trigger. The aluminum frame, gray grip and all remaining black polymer parts were refinished in a gray DuraCoat.

Wilson – who’s wondering if a Second-Generation Gray Ghost should be created ::)
 

·
Registered
Joined
·
30 Posts
Discussion Starter · #13 ·
I'm willing to bet that the fingergrip magazine extensions will help prevent malfunctions from short sliding caused by limpwristing. If you hold the gun with two fingers instead of one and a half, you'll help keep it from flipping upward from recoil.
 

·
Registered
Joined
·
77 Posts
Yesterday I watched a friend shoot his new hard chrome P3AT, with and with out the extensions. Lots more muzzle flip without the extension. Lots more gun control with the extension.

Another thing we both agreed on was it did not hurt the trigger finger with the extension. I only shot five mags through mine but I believe I could have shot it for quite a while without any discomfort.

Now I have to order more extensions. That Hard Chrome has my second one and its not comming back. Once he tried it he was a beliver.
 

·
Administrator
Joined
·
32,240 Posts
1 - 17 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top