Feeding jam

Discussion in 'P-3AT' started by AirMech74, Feb 21, 2008.

  1. AirMech74

    AirMech74 New Member

    23
    Feb 21, 2008
    Is this a normal thing with the P3AT's? When I put the mag in and then pull the slide to chamber a round, sometimes it jams and the round does not want to chamber/feed....I notice that if I do it really fast and let the slide slam forward it chambers. I bought this from a friend with a low round count and he told me about it...maybe the feed ramp needs to be touched up? Would love to get a lil insight on this.
     
  2. regrip

    regrip New Member

    166
    Aug 10, 2007
    Mine also only loads properly if I sling shot it. It is probably more normal than not. :)
     

  3. spence13e

    spence13e New Member

    May 11, 2006
    Kansas
    hi AirMech74, welcome to KTOG! this is quite normal for these little guns. you won't be getting near as much inertia from the light slide hand cycling as the guns gets from firing and the recoil. as long as it shoots ok, you should be good to go!
    spence
     
  4. Prostatix

    Prostatix New Member

    28
    Feb 7, 2008
    Agreed, normal at 1st.

    Mine did that until about the 200 round mark. Never malfunctioned during firing. Now it seems to rack by hand just fine. :cool:
     
  5. JFB

    JFB New Member

    Jul 25, 2005
    I instictively bump the back of the slide when I rack, :-/