Community for Kel-Tec Shooters banner
1 - 3 of 3 Posts

·
Registered
Joined
·
108 Posts
Discussion Starter · #1 ·
After about 1000 rounds I've noticed a slight amount of vertical play in the ejector (thin metal tab) that's molded into the left receiver. Does anyone else see this condition with their rifle? I called keltec and they seemed to think it was normal but despite me trying to clearly explain my issue, I'm not sure if they truly understood what I was describing. Thanks in advance.
 

·
Premium Member
Joined
·
17,775 Posts
The ejector is simply held in place by pressure between the stock tube and the plastic receiver. It has a flat base and the ejector sticks out through a slot in the tube. Look at the exploded parts diagram in the manual and hopefully that will help with my description. It's not molded into anything so it is a replaceable part. I wouldn't worry about it until or unless you start developing a rash of FTE's.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top