(CLOSED) : Metal Magazine Release P3AT/P32 $30

Discussion in 'Sold/Expired Classifieds' started by DaveNC, Jan 31, 2009.

  1. DaveNC

    DaveNC Active Member

    221
    Mar 7, 2008
    The only releases I'm making now are the P3AT/P32 in stainless steel and I'm not manufacturing the 100% finished ones anymore and I've reduced the price accordingly. For $30 you get a release that is 95% finished and all the buyer has to do is round the edges to fit it to the grip and polish the two visible ends. I'll update the pictures so you can see what you are getting for $30. The release on the right side of the picture shows where I grind and polished the edge that contacts the magazine which the buyer will not have to worry about.

    The only methods of payment I'm taking are postal money orders and bank checks, sorry no personal checks. Please email me at my dunamis1411@yahoo.com email address because it's where I track where my releases go.

    [​IMG]
     
    Last edited by a moderator: Jun 9, 2013
  2. patriot07

    patriot07 New Member

    52
    Jul 2, 2007
    Re: FS: Metal Magazine Release P11/P40 & P3AT/P32

    Email sent
     

  3. DaveNC

    DaveNC Active Member

    221
    Mar 7, 2008
    Re: FS: Metal Magazine Release P11/P40 & P3AT/P32

    I have two P3AT/P32 releases available for sale.
     
  4. patriot07

    patriot07 New Member

    52
    Jul 2, 2007
    Re: FS: Metal Magazine Release P11/P40 & P3AT/P32

    I received mine today. It was better than expected and faster than expected. If you're on the fence about one of these, get off the fence and email Dave. He's a good guy and makes a very good product.
     
  5. bensin2

    bensin2 Guest

    Re: FS: Metal Magazine Release P11/P40 & P3AT/P32

    + a million. Great product and seller.
     
  6. DaveNC

    DaveNC Active Member

    221
    Mar 7, 2008
    Re: FS: Metal Magazine Release P11/P40 & P3AT/P32

    I have two more P3AT/P32 releases made up.
     
  7. jgorniak

    jgorniak New Member

    55
    Mar 11, 2007
    Re: FS: Metal Magazine Release P11/P40 & P3AT/P32

    Dave, I'll take a P3AT release. PM Sent...
     
  8. Moose

    Moose New Member

    257
    Jun 22, 2005
    Re: FS: Metal Magazine Release P11/P40 & P3AT/P32

    Hey I'll take the other one.
    PM sent.
     
  9. theduke

    theduke Well-Known Member

    Dec 1, 2005
    Warminster Pa
    Re: FS: Metal Magazine Release P11/P40 & P3AT/P32

    I have one each for my P11 an P32. I love them. They are not blued on the exposed areas and it compliments the hard chrome.
     
  10. DaveNC

    DaveNC Active Member

    221
    Mar 7, 2008
    Re: FS: Metal Magazine Release P11/P40 & P3AT/P32

    Glad your happy with them!

    I don't have any made up but don't let that stop you from requesting one. It doesn't take me long to get em done and in the mail to you.

    Thanks,
    Dave
     
  11. Moose

    Moose New Member

    257
    Jun 22, 2005
    Re: FS: Metal Magazine Release P11/P40 & P3AT/P32

    Just got mine today, looks great.
     
  12. mgregg85

    mgregg85 New Member

    165
    Dec 15, 2007
    Re: FS: Metal Magazine Release P11/P40 & P3AT/P32

    How hard is it to install one of these babies?
     
  13. theduke

    theduke Well-Known Member

    Dec 1, 2005
    Warminster Pa
    Re: FS: Metal Magazine Release P11/P40 & P3AT/P32

    Not hard at all. You have to take the frame out of the grip. This gun is easy to take apart. On a P32 you have to move the hammer block out of the way to reassemble, but that is easy also.
     
  14. adamsesq

    adamsesq New Member

    Dec 25, 2006
    Re: FS: Metal Magazine Release P11/P40 & P3AT/P32

    Not hard at all.  You have to take the frame out of the grip. This gun is easy to take apart. On a P32 you have to move the hammer block out of the way to reassemble, but that is easy also.[/quote]

    Have changed mag catches on P11, P40 and P3AT all without taking the frame out of the grip - you just need some small needle nose pliers.

    -Scott
     
  15. virtual-rj

    virtual-rj New Member

    Jul 22, 2007
    Houston, TX
    Re: FS: Metal Magazine Release P11/P40 & P3AT/P32

    buy with confidence. DaveNC gets the RJ seal of approval
     
  16. ABN82MP

    ABN82MP New Member

    42
    Mar 6, 2009
    Re: FS: Metal Magazine Release P11/P40 & P3AT/P32

    Not sharpshooting you here, just a legitimate question...

    What is the difference between your magazine "release" and the magazine "catch" sold in the KT company store? Is it 2 completely different parts?

    I am getting jams in my P11 and noticed the mag is loose in the grip. I'm thinking I may need one of these to fix the problem.
     
  17. DaveNC

    DaveNC Active Member

    221
    Mar 7, 2008
    Re: FS: Metal Magazine Release P11/P40 & P3AT/P32

    The mag release sold in the store is made from plastic and obviously mine are cold rolled steel. All P11 mags are slightly loose in the grip as a result of where the plastic catch locks in to the magazine. However, the weapons still function fine like that. For my personal P11 I milled less material off of the release so my mag locks in tightly like I think it should. The metal releases I sell though are milled to the same as the plastic spec in that area. If I were you I'd post in the P11 section the specifics on how it is jamming. When/where/how etc.... If you really want a metal release that locks the mag in tightly I can do it but I'll have to disassemble mine to get the specs. If you go this route then you'll also have to take some material off of the case/shell ejector because the bullet cases will make contact with the ejector when you seat the mags. This can cause the ejector to break over time.

    Dave
     
  18. ABN82MP

    ABN82MP New Member

    42
    Mar 6, 2009
    Re: FS: Metal Magazine Release P11/P40 & P3AT/P32

    I guess I should have been more specific. I meant the metal mag releases sold in the store.
     
  19. Sangueffusor

    Sangueffusor New Member

    May 13, 2007
    Indiana
    Re: FS: Metal Magazine Release P11/P40 & P3AT/P32

    The only metal magazine release available directly from KT is for the PF-9.
     
  20. ABN82MP

    ABN82MP New Member

    42
    Mar 6, 2009
    Re: FS: Metal Magazine Release P11/P40 & P3AT/P32

    OK. Glad I asked then. For some reason it came up in the "Customers who bought this also bought..." when I was looking at P11 grips.