Jack did the nickle plating, the trigger has a piece of stethascope tube, and she has about 750 rds through her but have not had any practice ammo for 3 mo. My little carry piece... Jim <><
Thank You, Jack did my 32 also, and other than 5 short strokes with the 32, which was fine after cleaning the fp channel and putting some graphite in it, they both have worked perfect, combined over 1000 rds, and still going if I could find some 380 ammo. Jim <><rizo said:One of the better looking KT`S I`ve seen...nice job
I've still got 1 1/2 boxes of Hornady CD's, but don't want to use them for practice, Bart will save me some when it starts moving again, and thanks fellows for the compliments, I really like Jack's nickle plated work. Jim <><abuck50 said:Looks great Jim!
The only ammo I can find is DPX.
Craig
tell me about the grip panels, I think I just ordered the same ones off of e-bay but in black.diamond_jim said:Jack did the nickle plating, the trigger has a piece of stethascope tube, and she has about 750 rds through her but have not had any practice ammo for 3 mo. My little carry piece... Jim <><
tell me about the grip panels, I think I just ordered the same ones off of e-bay but in black.norfdet said:[quote author=diamond_jim link=1246986538/0#0 date=1246986537]Jack did the nickle plating, the trigger has a piece of stethascope tube, and she has about 750 rds through her but have not had any practice ammo for 3 mo. My little carry piece... Jim <><
Don at Traction Grips is an upright guy. I have his grips on my P3AT, on both mine and my wife's XDs, and I put some of his universal grips on my Ruger P95. I've not had a single problem with the grips coming loose either. You can order with confidence. I'll buy more from Don in the future.diamond_jim said:The grip panels are from www.tractiongrips.com, just stick on. I used silicone spray to the inside of the tube, slid it on, waited a couple hrs till it dried, then put a couple drops of super glue on either end. Haven't had a sore finger since. Jim <><
Don at Traction Grips is an upright guy. I have his grips on my P3AT, on both mine and my wife's XDs, and I put some of his universal grips on my Ruger P95. I've not had a single problem with the grips coming loose either. You can order with confidence. I'll buy more from Don in the future.[/quote]billjohnso20 said:[quote author=diamond_jim link=1246986538/0#9 date=1247600379]The grip panels are from www.tractiongrips.com, just stick on. I used silicone spray to the inside of the tube, slid it on, waited a couple hrs till it dried, then put a couple drops of super glue on either end. Haven't had a sore finger since. Jim <><
diamond_jim said:Jack did the nickle plating, the trigger has a piece of stethascope tube, and she has about 750 rds through her but have not had any practice ammo for 3 mo. My little carry piece... Jim <><
Thanks!!Subsoni[ch1202 said:][link]http://www.gunsmith.fuselier.com/slideoffer.html[/link]