Community for Kel-Tec Shooters banner
1 - 10 of 10 Posts

·
Registered
Joined
·
670 Posts
Discussion Starter · #1 ·
I've been thinkin' about a can for the subbie for quite awhile. Sometimes you can find something that meets your needs - I think this idea has possibilities :cool:

http://amtacsuppressors.com/products/cqb/

Sent an e-mail to Adam @ AMTAC to inquire if they will have a model to fit the Gen 2; here is his response.

We are coming out with a new suppressor in October. It's a 9mm over-barrel suppressor that should work on anything with 4" of exposed barrel. It will have 1/2x36 threads, but we will also be offering thread adapters.

As soon as it's available, it will be on our website.

Let me know if you have any other questions,

Adam Riser
Marketing Manager
AMTAC Suppressors
 

·
Registered
Joined
·
59 Posts
I plan on submitting a form 1 and just build one. All the parts are available online, and the stamp will cost more than the can. I have shot a home made in .223 and 9mm. They work very well, and you can take care of issues yourself.
 

·
Registered
Joined
·
886 Posts
I plan on submitting a form 1 and just build one. All the parts are available online, and the stamp will cost more than the can. I have shot a home made in .223 and 9mm. They work very well, and you can take care of issues yourself.
Be careful taking care of issues yourself. Per the ATF once the can is complete only an 02/07 SOT can work on it and you can not have any extra pieces.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top