Community for Kel-Tec Shooters banner
1 - 5 of 5 Posts

·
Registered
Joined
·
2,989 Posts
Discussion Starter · #1 ·
Should I replace any parts at ths point ?

I'm thinking recoil springs.
I've had no trouble with the mags popping out.
No trouble with follower or mag damage (smileys)
and no issues with FTF or FTE that I can't
account for.

Thanks all,

Rob
 

·
Banned
Joined
·
7,638 Posts
450 rounds is NOTHING! I think jocko has one with almost 4000 rounds and the original recoil springs.

You can change the springs if you want though. KT service will ship them to you for free. Also get the new, harder, button head screw.

When you get it, take out your extractor and clean the carbon off and under it. Also check your trigger pin to make sure it is not creeping out--You should only see 1/16" or less sticking out.

Happy shooting.

Packer.
 

·
Registered
Joined
·
2,989 Posts
Discussion Starter · #3 ·
Trigger pin is good.

When did they start making the harder buttonhead
screw, I replaced the extractor, spring and screw
in July 06.

Thanks Packer,

Rob
 

·
Administrator
Joined
·
32,240 Posts
I think that new screw is post July (not sure) so you might order one, but if it ain't broke...
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top