Community for Kel-Tec Shooters banner
1 - 14 of 14 Posts

·
Administrator
Joined
·
32,246 Posts
I never had a problem with mine, but there was a time years back when I saw some reliably issues posted here. Perhaps a bad batch, I don't know. Overall, with the longer spring and extra rounds, they may violate the "KISS" principal and be slightly less reliable than standard mags, but that may depend on the luck of the draw. Most probably work just fine.
 

·
Registered
Joined
·
274 Posts
Extended mags on my P32 have worked fine.

On the P3AT, my extended mags work if I use the "teacup" two-hand hold, but tend to cause flex in the frame/grip during recoil & cause unreliable feeding with a normal grip (may just be how my hands work)

P32 recoil is light enough that there hasn't been an issue with it.
 

·
Registered
Joined
·
5 Posts
unreliable feeding with a normal grip (may just be how my hands work)
Learn something every day. Thanks, cc-hangfire.

I have three of Kel-Tec's 10-round magazines. All three work fine in my P32, but none of them work in a friend's P32.

We had assumed it was something about his gun, but maybe it is something with the shooter. We'll try switching guns and see if the problem stays with the gun or the shooter.
 

·
Registered
Joined
·
1,981 Posts
I have one that jams on the same round when firing a fully loaded mag, my other one works fine.

theduke - who sometimes wonders what ever happened to Wilson!
 

·
Administrator
Joined
·
32,246 Posts

·
Registered
Joined
·
129 Posts
Two brand new ten round magazines. Both failed in a near flawless 1st gen P32. I've owned since 2000.

Never will own -much less trust- another.

"We don't hold grudges We remember the facts."

Gray_Fox
 

·
Registered
Joined
·
21 Posts
I had multiple issues FTE/FTF with the one I purchased just to use at the range. I ended up selling it. I personally couldn't trust it if carrying. Plus the whole purpose for me of buying the P-32 was due to it's size/weight. The extended mag only adds to the bulk I wouldn't want anyways.
 

·
Registered
Joined
·
45 Posts
Thought I'd share my experience. I bought a 10 round OEM magazine and put 100 rounds through it today. I have over 500 flawless rounds with Fiocchi ball in the standard magazines. The odd part is 9 of 10 times the slide did not lock back after the last round and the gun acted as if it loaded another round (I.E. I could pull the trigger). No other issue than last round lock open not working with this magazine.
 
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top