Community for Kel-Tec Shooters banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 36 Results
  1. KSG Bullpup Shotgun
    All the way back in July, I was a newbie researching shotguns and asked a question on this forum about a choke for a KSG-25. I would like to say thank you to everyone who answered my questions about it and this forum in general for just being cool. Anyway, that was the first domino that fell and...
  2. ksg_25_lightButtonMod.jpg

    KSG-25 light mount issues The mloc mount for the Odin Mini is at a sharp angle so it doesn't fit easily against the mag tube Clamping the light down bent out the handguard but it is rock solid Had to grind off a bit of the back side of the button to get the light off the mount since tube interfered
  3. ksg_25_mlokLightMount.jpg

    KSG-25 light mount Takes some hard clamping and some grinding on the Olight release button and it'll bend up and gouge up the hand guard, but it mounts very solidly and is definitely worth it to have the light in that position
  4. ksg_25_rearEnd.jpg

    KSG-25 rear end Kel-Tec cheek guard and KickEEZ cheek rest Hi-Tech Custom Concepts extended tube selector switch Of course the sling looped through the factory mount, works well
  5. ksg_25_triggerAndOptic.jpg

    KSG-25 grip and optic The trigger is upgraded with MCARBO's aluminum trigger and lighter spring set and HOLY CRAP its a good trigger ESPECIALLY for a bullpup of any kind The optic is a Burris Fastfire 3 three MOA red dot on a UTG .75" ultra-slim riser, very solid
  6. ksg_25.jpg

    Full view of KSG-25 It has: Kel-Tec -Cheek Rest, extended butt pad Magpul -sights, sling, hand stop Burris -Fastfire 3 moa red dot UTG -.75" riser High-Tech Custom Concepts -Extended selector switch, choke adapter kit: use impact and their socket -Lower tube pic rail clamp MCARBO -trigger and spring
  7. ksg_25_businessEnd.jpg

    The business end of KSG-25 with Hi-Tech CC choke adapter Used an impact wrench and their special barrel nut socket and I had zero trouble
  8. ksg_25_grip.jpg

    Grip area of KSG-25 with a spaced out MAGPUL hand stop kit All in a row, space between the two stops is too small for my hand and too much to have on the slide so I spaced them out and put the largest stop on the Hi-Tech CC lower tube pic rail clamp, which is also what the light pressure pad is on
  9. ksg_25_lightAndPressurePad.jpg

    KSG-25 light and pressure pad arrangement The light is an Olight Odin Mini, pressure pad is mounted on Hi-Tech CC lower tube pic rail clamp That clamp has to be torqued TO THE MOON to stay in place against the recoil and is a pain to take off to clean the firearm and replace, but it works
  10. ksg_finishedForNow.jpg

    My finished (for now) KSG-25 build It has: Kel-Tec -Cheek Rest, extended butt pad Magpul -sights, sling, hand stop Burris -Fastfire 3 moa red dot UTG -.75" riser High-Tech Custom Concepts -Extended selector switch, choke adapter (impact and socket) -lower tube pic rail MCARBO -trigger and springs
  11. New Member Introductions
    I'd just gotten two KSG and wanted to join for info tips and tricks about them. That is all for now.
    ksg
  12. KS7 Bullpup Shotgun
    Hey everyone! I'm back again with another mod for my lovely KS7. Not really a mod, but a custom-made accessory. It is a 6-round shell holder, with some added features. Why Magnets? Shotguns are mostly side-loaded or bottom loaded, and if you don't want to flip the gun over, it is generally...
  13. KS7 Bullpup Shotgun
    I review the Missouri Tactical Recoil Pad for the KelTec KSG and KS7 shotguns. This H&K 416 style recoil pad replaces the flat factory pad on both shotguns. You pretty much pry off your old one and push in this one and you're good to go (though the instructions suggest unscrewing the retaining...
  14. Accessories
    Hey, first post; read a bunch; figured I'd share as the most recent post was 2015 for the shotlock ar and KSG being done together with a mod that has you bending metal. I found an alternative using offset screws. A coupling nut could also be used. But essentially where the metal U like piece...
  15. KSG Bullpup Shotgun
    Wondering why my KSG magazine tube will only take six 2 3/4 shells....
    ksg
  16. KSG Bullpup Shotgun
    Hey all! Looking for some advice or clarification here. I have spikes to go in the front of my KSG which replace the follower tube bolts on the front. I’m hesitant to put them on because when cleaning your KSG you’re supposed to loosen the front bolts to take the gun apart. The spikes require...
  17. KSG Bullpup Shotgun
    I'm on a mission to really mitigate the infamous kick that the KSG is known for. I've heard the rumors of some people actually slipping a recoil pad over a Kel-Tec extended butt pad. I'm curious if there's anyone here who is actually running this set up? How much has this combination actually...
  18. KSG Bullpup Shotgun
    I'm new to shotgunning. I've plenty of experience with pistols and rifles. With cartridges, all one needs to consider is bullet weight, material composition, encasement or lack there of (FMJ, JHP, RNL, etc.) and +P+, but other than that it is pretty straight forward. I love the seemingly...
  19. KSG Bullpup Shotgun
    When I load a full 7 rounds in the tube the selector switch will not move. If I only load 6 it works fine but with 7 it can’t clear the lip of the cap. The KSG is supposed to hold 7 @ 2 3/4” but If I load 7 I’m unable to move the switch to load the other tube. It’s as though the spring is...
1-19 of 36 Results
Top